• Onboard Celeron® M 1.0 GHz CPU
  • 2 x RS-232 ports
  • Two 10/100Base-T RJ45 ports
  • 2 x USB ports (one with lockable cable mechanism)
  • Independent 4-axis motion control
  • 32-ch isolated Digital I/O (16-ch inputs and 16-ch outputs)
  • 2/3-axis linear, 2-axis circular interpolation function
  • Continuous interpolation
  • Up to 4 Mpps output; up to 1 MHz encoder input
  • Two pulse output types: CW/CCW or pulse/direction
  • Two encoder pulse input types: A/B or CW/CCW

  • 產品介紹
    PEC-3240 is a standalone embedded motion controller that provides 4-axis motion and 32 isolated digital inputs/outputs. This controller also supports serial communication ports and several other networking interfaces. The Windows XP Embedded OS offers a pre-configured image with optimized onboard device drivers. You can seamlessly integrate your applications into Windows XP Embedded and speed up your system development with this application ready controller.

    General Power Consumption Typical: 24 W
    Temperature (Operating) -10 ~ 65° C (14 ~149° F) @ 5 ~ 85% RH
    Humidity 5 ~ 95% RH, non-condensing (IEC 68-2-3)
    Temperature (Storage) -20 ~ 80° C (-4 ~176° F)
    Dimensions (W x H x D) 255 x 152 x 59 mm (10" x 6.0" x 2.3")
    System Hardware CPU Celeron M 1.0 GHz
    Memory 512MB DDR SDRAM
    Encoder Interface Isolation Protection 1,000 VDC
    Input Type Quadrature (x1, x2, x4 A/B phase) or CW/CCW
    Input Range 5~25 V
    Max. Input Frequency 1 MHz
    Axes Linear Interpolation V
    2-axis Circle
    Number of Axes 4
    I/O Interface Serial Ports 2 x RS-232 with DB9 connectors
    USB Ports 2 x USB, EHCI, Rev. 2.0 compliant
    LAN 2 x 10/100 Base-T RJ-45 ports
    Isolated Digital I/O Channels Input: 16, Output: 16
    Isolation Protection 1000 V
    Pulse Type Motion Control Motor Driver Support Servo/stepping
    Interpolation 2-axis linear, 3-axis linear, 2-axis circular

    * 上述商品規格僅供參考,實際規格以實物為準。