Loading
臺灣銀行-共同供應契約專區
駿緯國際最新產品型錄
最新研華採購型錄
產品資訊
PCM-3240

PCM-3240

  • PC/104 interface
  • Independent 4-axis motion control
  • Hand wheel and jog function
  • 2/3-axis linear interpolation function
  • 2-axis circular interpolation function
  • Continuous interpolation function
  • Programmable T/S-curve acceleration/deceleration rate
  • Up to 4 MPPS pulse output for each axis
  • Two pulse output types: CW/CCW or Pulse/Direction
  • Up to 1 MHz encoder input for each axis
  • Two encoder pulse input types: A/B phase or Up/Down
  • Constant speed control
  • Position management and software limit switch function
  • BoardID™ switch

  • 產品介紹
    PCM-3240 is a 4-axis stepping/pulse-type servo motor control card designed for general-purpose motion applications. PCM-3240 is a high-speed 4-axis motion control card for the PC/104 bus that simplifies stepping and pulse-type servo motor control, giving you added performance from your motors. The card's intelligent NOVA MCX341-motion ASIC builds in a variety of motion control functions, such as 2/3-axis linear interpolation, 2-axis circular interpolation, T/S-curve accleration/deceleration rate and more. In addition, the PCM-3240 performs these motion control functions without processor loading during driving. For advanced applications, we supply Windows DLL drivers and user-friendly examples to decrease your programming load. Moreover, with a free bundled PCM-3240 motion utility, you can easily complete configuration and diagnosis.

    產品規格
    PCM-3240-AE
    General Power Consumption Typical: 5 V @ 850 mA; Max.: 5 V @ 1 A
    Connectors 2 x IDC 50-pin Male Connector
    Temperature (Operating) 0 ~ 60°C (32 ~ 140°F)
    Humidity 5 ~ 95% RH, non-condensing (IEC 68-2-3)
    Temperature (Storage) -20 ~ 85°C (-4 ~ 185°F)
    Bus PC/104
    Dimensions (L x W) 96 x 90 mm (3.8" x 3.5")
    Encoder Interface Isolation Protection 2,500 VDC
    Input Type Quadrature (A/B phase) or up/down
    Input Range 5~25 V
    Max. Input Frequency 1 MHz
    Axes Linear Interpolation V
    2-axis Circle
    Interpolation
    V
    Number of Axes 4
    Advanced Functions Servo On Output
    Channels
    4
    General Purpose
    DO Channels
    16
    General Purpose
    DI Channels
    12
    Pulse Type Motion Control Motor Driver Support Servo/stepping
    Interpolation 2-axis linear, 3-axis linear, 2-axis circular

    * 上述商品規格僅供參考,實際規格以實物為準。


    TOP