駿緯線上報修
臺灣銀行-共同供應契約專區
中科院最新共約型錄
船舶認證工業用電腦
研華專區
產品資訊
PCI-1220U

PCI-1220U

  • Independent 2-axis motion control
  • Hand wheel and jog function
  • 2-axis linear interpolation function
  • 2-axis circular interpolation function
  • Continuous interpolation function
  • Programmable T/S-curve acceleration/deceleration rate
  • Up to 4 Mpps output for each axis
  • Two pulse output types: CW/CCW or pulse/direction
  • Up to 1 MHz encoder input for each axis
  • Two encoder pulse input types: A/B phase or up/down
  • Constant speed control
  • Position management and software limit switch function
  • BoardID™ switch

  • 產品介紹
    Advantech's PCI-1220U is a 2-axis Universal PCI stepping/pulse-type servo motor control card. This card adopts NOVA MCX312 IC which supports 2-axis motion control with interpolations. Besides, functions like continuous interpolation, programmable T/S-curve acceleration/deceleration, constant speed control are also accomplished. For users that only need to drive two motors at most, PCI-1220U is a cost-effective solution than 4-axis motion control cards. The DLL driver for PCI-1220U together with the utility make it easy for users to test the functionalities of the card and to develop their own application.

    產品規格
    PCI-1220U-AE
    General Power Consumption Typical: 5 V @ 850 mA; Max.: 5 V @ 1 A
    Connectors 1 x 50-pin SCSI Female Connector
    Temperature (Operating) 0 ~ 60°C (32 ~ 140°F)
    Humidity 5 ~ 95% RH, non-condensing (IEC 68-2-3)
    Temperature (Storage) -20 ~ 85°C (-4 ~ 185°F)
    Bus Universal PCI V2.2
    Dimensions (L x W) 175 x 100 (6.9" x 3.9")
    Encoder Interface Isolation Protection 2,500 VDC
    Input Type Quadrature (A/B phase) or up/down
    Input Range 0~2 VDC for low; 5~30 VDC for high
    Max. Input Frequency 1 MHz
    Axes Linear Interpolation V
    2-axis Circle
    Interpolation
    V
    Number of Axes 2
    Advanced Functions Servo On Output
    Channels
    2
    General Purpose
    DO Channels
    8
    General Purpose
    DI Channels
    6
    Pulse Type Motion Control Motor Driver Support Servo/stepping
    Interpolation 2-axis linear, 2-axis circular

    * 上述商品規格僅供參考,實際規格以實物為準。


    TOP