|
CPU
|
MIC-3321: Inter Pentium M 760 2.0 GHz with 2 MB L2 cache
|
|
MIC-3321C: Inter Celeron M Ultra Low Voltage 373 1.0 GHz with 512 MB L2 cache
|
|
Chipset
|
Inter 915 GM (GMCH) + Inter 82801 FBM (ICH6-M)
|
|
BIOS
|
Award 4 MB Flash
|
|
Bus
|
Front Side Bus
|
533 MHz (Inter Pentium M 760 2.0 GHz CPU)
|
|
400 MHz (Inter Celeron M Ultra Low Voltage 373 1.0 GHz CPU)
|
|
PCI Bus
|
PCI-to-PCI Bridge : PERICOM 9I7C8150
|
|
7 x 32bit/33 MHz Compact PCI bus Master interface
|
|
3.5 V/ 5 V VIO adjustable
|
|
Memory
|
Directed Soldered 512 MB DDR2 SDRAM
|
|
Graphics
|
Controller : Inter Graphics Media Accelerator 900
|
|
VRAM : DVMT 3.0 128MB
|
|
Resolution : Up to 2048 x 1536 with 32-bit color at 75 Hz
|
|
Ethernet
|
Interface : 10/100/1000 Base-TX Gigabit Ethernet
|
|
Controller : 2 x Inter 82573E/L PCI Express Gigabit Ethernet Controller
|
|
Connector : 2 x RJ-45
|
|
Supports Pre-boot Execution Environment (PXE)
|
|
Serial
|
Interface : RS-232
|
|
Controller :2 x 16C550 Compatible
|
|
Data Bits : 5 , 6 , 7 , 8
|
|
Stop Bits : 1 , 1.5 , 2
|
|
Parity : None , Even , Odd
|
|
Speed (bps) : 50~115.2 k
|
|
Data Signal : TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
|
|
Connector : 2 x DB9 male
|
|
Two as front I/O, one as rear I/O
|
|
P-IDE
|
One channel P-IDE
Supports PIO mode 4 (16.67 MB/s data transfer rate) and ATA 33/66/100 (33/66/100MB/s data transfer rate)
|
|
1 x Compact Flash Socket Type II
|
|
1 x 44-pin 2.5” HDD connector
|
|
SATA
|
SATA interface with data transfer rate up to 150MB/s
|
|
1 x External SATA connector
|
|
USB
|
4 x USB 2.0 channels up to 480Mbps, 2 as front I/O, 2 as rear I/O
|
|
PS/2
|
PS/2 for keyboard and mouse legacy support
|
|
Watchdog Timer
|
0~64s, 0.25s step, generate signal
|
|
Hot Swap
|
Support for all signals to allow peripheral boards to be hot swapped. The individual clocks for each slot and access to the backplane ENUM# signal comply with the PICMG 2.1 Hot Swap specification. (PCI to PCI bridge GPIO3)
|
|
Front Panel Functions
|
4HP Board
|
1 x VGA-CRT 15-pin D-SUB connector
|
|
Ethernet : 1 x RJ-45 connector with integrated LEDS
|
|
USB : 2 x 4-pin connectors
|
|
Reset : Reset button, guarded
|
|
LED : Power, HDD
|
|
8HP Board
(Additional to 4HP
|
COM1 : 1 x DB9 RS-232 connector
COM3 : 1 x DB9 RS-232 connector
|
|
PS/2 : 1 x PS/2 connector for keyboard and mouse
|
|
Ethernet : 1 x RJ-45 connector with integrated LEDS
|
|
Rear I/O via J2
|
2 x USB 2.0 channels
|
|
2 x Gigabit Ethernet channels with LED
(shared with front I/O)
|
|
1 x COM port
|
|
1 x VGA-CRT channel (shared with front I/O)
|
|
1 x PS/2 keyboard/mouse channel
(shared with front I/O)
|
|
Compliancy
|
PICMG 2.0 Rev. 3.0 compatible
|
|
Compact PCI Hot Swap Specification PICMG 2.1 R2.0
|
|
Environment
|
Operating Temperature
|
0~50°C (Pentium M 2.0G CPU)
|
|
0~50°C (Celeron M 1.0G CPU)
|
|
-25~70°C (Optional : Celeron M 1.0G CPU only)
|
|
Storage Temperature
|
-40~80°C
|
|
Physical
|
Dimensions
(W x H)
|
160 x 100 mm (3U)
|
|
Weight
|
0.6 kg
|
|
Rear Transition Board
|
P/N
|
MIC-3521
|
|
Width
|
8HP
|
