• IEEE 488.2 Standard interface
  • Complete Talker/Listener/Controller
  • Industry standard 32-bit PCI bus
  • Data transfer rates over 1.5 MB/s
  • 1,024-word FIFO buffer
  • High-Speed State Machine Bus Manager
  • 7 Interrupt lines, shared interrupt capability
  • Transparent interrupt enabling/disabling
  • Includes GPIB-Library software
  • Low profile MD1 size

The PCI-1671UP IEEE-488 interface converts any PCI bus personal computer into an instrumentation control and data acquisition system. Connect up to 14 instruments using standard IEEE-488 cables such as the PCL-10488-2, 2 meter IEEE-488 interface cable. The PCI-1671UP transfers data over the GPIB at rates in excess of 1.5 million bytes per second using the maximum IEEE-488 specification cable length (2 meters times the # of devices). A 1,024-word FIFO buffer and the advanced REP-INSW ISR data transfer method provide the horsepower required to then transfer the data between the GPIB board and the host computer. The high-speed state machine also provides byte-to-word packing and unpacking, and because words carry twice the information that bytes do, packed data requires fewer bus cycles to transfer the same GPIB information.
The PCI-1671UP adheres to ANSI/IEEE Standard 488-1978. Often referred to as the IEEE-488.2 bus, GPIB bus or HP-IB bus, the GPIB (General Purpose Interface Bus) is a standard for instrumentation communication and control for instruments from manufacturers the world over. The GPIB provides handshaking and interface communications over an 8-bit data bus employing 5 control and 3 handshake signals. Equipped with PCI-1671UP, a personal computer can control GPIB instruments, gather data from GPIB test equipment, or become a data acquisition station in a GPIB system.

General Power Consumption 5 VDC @ 375mA (typical)
I/O Connectors 1 x IEEE 488 standard 24-pin
Temperature (Operating) 0 ~ 60°C (32 ~ 158°F) @ 0-90% RH
GPIB Transfer Speed 1.5 MB/s
OS Support Windows® 2000/XP
Max. Connection 15

* 上述商品規格僅供參考,實際規格以實物為準。