Loading
臺灣銀行-共同供應契約專區
駿緯國際最新產品型錄
最新研華採購型錄
產品資訊
ADAM-6022

ADAM-6022

  • 2 loop PID control algorithms built in one package
  • 3 analog input/1 analog output/1 digital input/1digital alarm output for 1 PID loop
  • Support multiple analog I/O ranges: 0 ~ 10 VDC, 0 ~ 20 mA and 4 ~ 20 mA
  • Support heating/cooling (direct/reverse) action mode
  • Support loop open/close (PID disable/enable) and analog output manual control modes
  • Built-in watchdog timer

  • 產品介紹
    Advantech’s ADAM-6022 is an Ethernet-enabled dual-loop PID controller for general purposed PID control applications. A user-friendly utility software is included for users to set PID parameters (Pv, Mv, & Sv). Through the integrated web page, users can monitor and change the control set point through the Internet via web browser. The ADAM-6022 also supports MODBUS/TCP protocol. HMI software can easily access this module to monitor the I/O data and change the control parameters.

    產品規格
    ADAM-6022-A1E
    Display LED Indicators Status, Comm, Link, Speed
    Power Supply Power Requirement 10~30 VDC
    Analog Input Channels 6 differential
    Voltage Range ±10 V
    Current Input 0~20 mA 4~20 mA
    Channel Independent Configuration Yes
    Sampling Rates 10 samples/second
    Resolution 16-bit
    Input Impedance 20 MOhm
    Span Drift ±25 ppm/°C
    Zero Drift ±6 µV/°C
    CMR @ 50/60 Hz 90 dB
    NMR @ 50/60 Hz 60 dB
    Analog Output Channels 2
    Voltage Range 0~10 V
    Current Output 0~20 mA 4~20 mA
    General Watchdog Timer System (1.6 second) & Communication (programmable)
    Connectors 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
    Temperature (Operating) -10~70 °C (14~158 °F)
    Humidity 20~95 %RH
    Temperature (Storage) -20~80 °C (-4~176 °F)
    Interface 10/100Base-T(X)
    Peer-to-Peer No
    GCL No
    Isolation Protection 2000 VDC
    Communication Protocol Modbus/TCP, TCP/IP, UDP, and HTTP
    Communication Speed Ethernet: 10/100Mbps
    Comm. Distance Ethernet: 100 m
    Digital Input Channles 2
    Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
    Digital Output Channels 2 Open collector to 30V, 100 mA max. load
    Power Dissipation 300 mW for each module

    * 上述商品規格僅供參考,實際規格以實物為準。


    TOP