Loading
臺灣銀行-共同供應契約專區
駿緯國際最新產品型錄
最新研華採購型錄
產品資訊
PCI-1682U

PCI-1682U

  • Supports CANopen protocol
  • Supports Windows 2000/XP/Vista/7, Linux and QNX CAN driver
  • Windows® DLL library and examples included
  • LED indicated transmit/receive status on each port
  • I/O address automatically assigned by PCI PnP
  • Optical isolation protection of 1000 VDC ensures system reliability
  • 16 MHz CAN controller frequency
  • High speed transmission up to 1 Mbps
  • Operates two separate CAN networks at the same time
  • PCI bus 2.2 compliant

產品介紹
PCI-1682U is a special purpose communication card that offers the connectivity of the Controller Area Network (CAN) to your PC. With its built-in CAN controllers, the PCI-1682U provides bus arbitration and error detection with an automatic transmission repeat function. This drastically reduces the chance of data loss and ensures system reliability. The onboard CAN controllers are located at different positions in the memory, and you can run both CAN controllers independently at the same time. Besides, PCI-1682U has a universal PCI connector, which is compatible with both new 3.3 V signaling systems and traditional 5 V signaling systems. With high-compatibility, the PCI-1682U can be used in diverse systems.

Controller Area Network (CAN)
The CAN is a serial bus system especially suitable for networking “intelligent” I/O devices as well as sensors and actuators within a machine or plant. Characterized by its multi-master protocol, real-time capability, error correction, high noise immunity, and the existence of many different silicon components, the CAN serial bus system, originally developed by Bosch™ for use in automobiles, is increasingly being used in industrial automation.

Direct Memory Mapping Enables Direct Access to the CAN Controller
The PCI-1682U is assigned a memory address. This is the simplest method of integrating a board in a PC and provides the quickest access since the board is treated by the PC as being standard RAM.

Advantech CANopen Protocol Library
Advantech CANopen Protocol Library (acoapi) provides a C application programming interface (API) for accessing the CANopen network protocol stack of nodes. It is easy to use, configure, start and monitor the CANopen devices careless CAN bus, developer just focused on CANopen application functionality.


產品規格  

Specifications

General

Card Interface Universal PCI V 2.2

Certifications CE, FCC class A

Connectors 2 x DB9-M

Dimensions 175 x 105 mm(6.9" x 4.1")

Ports 2

Power Consumption 5 V @ 400 mA (Typical)

Communication

CAN Controller NXP SJA1000

CAN Transceiver PCA82C250

Protocol CAN2.0 A/B

Signal Support CAN_H, CAN_L, GND

Speed 1 Mbps

Termination Resistor 120 ohm (selected by jumper)

Software

CAN bus Driver Windows 2000/XP/Vista/7 (x86 and x64), Windows CE 5.0/6.0, Linux, QNX

CANopen Software Windows 2000/XP/Vista/7 (x86 and x64), Windows CE 5.0/6.0

Environment

Operating Temperature 0 ~ 65° C (32 ~ 149° F)

Storage Temperature -25 ~ 85° C (-13 ~ 185° F)

Operating Humidity 5 ~ 95% RH

Storage Humidity 0 ~ 95% RH

Regulatory Approvals

EMC EN55011, EN55022, EN61000-6-4, EN55024, EN61000-6-2, IEC 61000-4-2/3/4/6/8, FCC Part 15 Subpart B (Class B)

Protection

Isolation Protection 1,000 VDC

Ordering Information

PCI-1682U 2-port CAN-bus Uni PCI COMM Card w/CANopen

 

* 上述商品規格僅供參考,實際規格以實物為準。


TOP